TECNOCONTROL SE320EC- CARBON MONOXIDE detector with replaceable sensor

Operation and general information

The Beta gas detector is equipped with a sensitive element concentration of Carbon Monoxide in the air.

When you & nbsp; the & nbsp; detector & nbsp; It is & nbsp; turned on & nbsp; in & nbsp; STATE & nbsp; & nbsp; "ON" & nbsp; on & nbsp; Front & nbsp; the & nbsp; LED GREEN (ON) remains constantly on.

When in the air the quantity of ppm of carbon monoxide ("CO") measured by the detector exceeds one of the 3 pre-set alarm thresholds

the detector switches to "ALARM" mode by activating with intermittence of 0.5 sec. the buzzer and the RED LED.

Installation

installation and decommissioning of the appliance must be carried out by specialized technical personnel.

The installation of the combustion appliance and any device & nbsp; Stop & nbsp; should & nbsp; be & nbsp; comply with & nbsp; to & nbsp; requirements & nbsp; & nbsp; Law & nbsp; current national laws.

The Beta gas detector can be installed in domestic environments.

This device is to be used only for the detection of Carbon monoxide ("CO").

Carbon monoxide is a very poisonous, colorless and odorless gas, produced due to bad combustion.

The high poisonousness of the "CO" makes & nbsp; yes & nbsp; that & nbsp; & nbsp; his & nbsp; presence & nbsp; also & nbsp; a & nbsp; very low & nbsp; concentrations, & nbsp; can cause a subject exposed for a long period of nausea, headache; & nbsp; loss & nbsp; & nbsp; consciousness. & nbsp;

& nbsp; Display & nbsp; a & nbsp; concentrations & nbsp; more It is & nbsp; ongoing, & nbsp; the & nbsp; "CO" & nbsp; can & nbsp; cause & nbsp; & nbsp; Death, & nbsp; having & nbsp; & nbsp; properties & nbsp; to bind to blood much more easily than oxygen.

It is clear that the "CO" detector, having to provide an action preventive, & nbsp; should & nbsp; action & nbsp; a & nbsp; very low & nbsp; concentrations, & nbsp; First & nbsp; ie & nbsp; that & nbsp; the amount of "CO" absorbed by the body becomes dangerous.

The appliance & nbsp; It is & nbsp; calibrated & nbsp; in & nbsp; Factory & nbsp; to & nbsp; report & nbsp; Alarm & nbsp; when one is measured CO concentration in air equal to:

50 ppm for 70 minutes

100 ppm for 20 minutes

300 ppm for 1 minute

These thresholds are guaranteed by the manufacturer for one period longer than 6 years , after this period or in case of the "FAULT" LED lights up, the product must be replaced.

The & nbsp; Front & nbsp; the & nbsp; detector & nbsp; you & nbsp; It is & nbsp; indicated & nbsp; also & nbsp; & nbsp; Date & nbsp; over & nbsp; & nbsp; which & nbsp; the product must necessarily be replaced.

TECHNICAL CHARACTERISTICS

Power supply: 230Vac- 50 / 60Hz 2,3VA & nbsp; / & Nbsp; 12Vdc 0.6W.

Sensor life span: Beta 762 CO; SE320EC: & nbsp; 6 years in the environment domestic according to specifications

Working temperature: -10 ° C ... + 45 ° C.- Humidity Relative: & nbsp; & nbsp; & nbsp; 30% ... 90% UR.-

Sensor operation limit: 5000 ppm max 15 minutes - Maximum time of storage: 6 months- Intervention thresholds: l50 ppm for 70 minutes. l100 ppm for 20 minutes. 300 ppm for 1 minute.

Acoustic signaling: 85 dB (A) at 1 meter.

Degree of protection: & nbsp; IP42.

Electronic self-diagnosis with reporting of anomalies.

The alarm device for "CO" complies with the European standard EN 50291-1: 2010 "Electrical appliances for the detection of carbon monoxide carbon in domestic environments