TECNOCONTROL SE230KM - Methane gas detector kit for home use

Methane gas detector with pre-arranged concentration threshold system compliant with CEI EN 50194 standard. As soon as the concentration threshold is reached, the detector turns on a red LED (ALARM) and the buzzer of the buzzer automatically.

At the same time, the detector operates the solenoid valve through a relay placed inside it. Immediately after the condition of danger to the environment has come to an end, the device automatically stops the alarm condition at once.

To completely reset the system, simply reset the safety solenoid valve manually. The item is equipped with a signaling power device (green LED) and working-sensor "FAULT" (yellow LED). The detector is also designed to be connected to further remote signaling devices (mod. SE 296 / SE 195).

To maintain the IMQ homologation of the system, use other devices of the SE codes 230/233 as remote sensors. The difference between the models is in the operating mode of the relay during operation the solenoid valve: Item SE230 has a negative safety relay; article SE233 positive safety one, means that it is powered at any time.

A change of condition can also be obtained by moving the jumpers on the printed circuit.

Design and development - 100% Italian production.

Included: Solenoid valve

Type: GAS GAS RM NA 3/4 "

Pe 500 mbar T.amb -15 + 60 ° C

IP65 - 230Vac - 17VA

TECHNICAL SHEET