CAME ZBX7N 88001-0065- Card for BX motors

It is suitable for the control of powered sliding automations 230V single phase of the BX-A / BX-B series. The card must be powered with one voltage of 230V (a.c.) in terminals L1 and L2.

It is protected at the input with two 5A fuses, while low voltage control devices (24V) are protected by a 1A fuse.

The product is now ready for connection to the cloud, via Came Connect ; Using dedicated gateways is therefore can manage, set, command and display the

states of the remote automation.

It is possible to manage all the wireless accessories of the Rio series System using the plug-in accessory 806SS-0040 .

The new tab allows you to set the safety inputs CX and CY also resistively; in this case it is possible to connect directly resistive sensitive edges

(8k2), facilitating the bringing the system up to standard.

Implementation of Rolling Code and Twin (Key Block) integrated. Reception can then be set on the card of all Came radio controls (fixed code,

Rolling code and twin) or limit the use only to Rolling code or Twin remote controls in Key mode Block. This way you can manage up to 250 different users with only

aid of the AF43S (for Rolling code or Twin a 433 MHz) or AF868 (for 868 MHz rolling code remote controls);

By using the Memory Roll, it is possible to save or load the configuration data and radio controls stored in the automation.

The new tab directly manages Came keyboards using the R800 plug-in accessory or transponder selectors using the R700 accessory.

The RSE accessory can manage the "Combined" mode of two automations (one master and one slave) by setting all the parameters on a single automation (master).

By acting directly on a function of the card, it is possible set the gate opening direction without having to change the engine wiring.

Thanks to the “Counting Maneuvers Function” it is possible to see in each moment the number of maneuvers performed by the automation making more easy maintenance

of the system.

The display menu (7 segments) and the keys favor a more set-up fast and make settings and adjustments easier automation.

In an increasingly energy-saving perspective, the new one tab, through the dedicated accessory RGP1 ​​, allows you to reduce, from 5 Watts to 0.5 Watts, the consumption

of the automation when this is not moving (stand-by).