CAME KIT STYLO-ME for single swing gates max 1.8mt

CAME KIT STYLO-ME for swing gates max 1.8mt per leaf.

STYLO-ME - 24V irreversible gearmotor with encoder for leaves up to 1.8m. Ideal for applications on columns with minimal footprint
Suitable for existing or newly installed gates, Stylo is perfect for automating walkways or driveways up to 1.8 meters per leaf.

Tested in accordance with European standards on impact forces, it can be mounted on small and medium-sized pillars, starting from 10 centimeters in width.

It installs quickly and without additional costs, concretely facilitating the installer's work and speeding up the issue of the system's Certificate of Conformity.

- Encoder movement control
- Tested according to the parameters dictated by current legislation.
- For installations on gates with a minimum width pillar (starting from 8 cm) also close to a wall or fence, thanks to the option with straight arm.
- Possibility of emergency operation in case of blackout.
- Reliable and robust even if small in size, thanks to the irreversibility of the system.
- Release system with personalized key.

Electronics and technology of Stylo

Display to view the programming of the functions
Signaling LEDs integrated in the electronic board, for a quick diagnosis of the system functions
Self-diagnosis of safety devices
Electronic management at ENCODER, for obstacle detection
Limit switch control via ENCODER, for easy management of movement and slowdown phases
Simplified installation: a single four-conductor cable is sufficient for power management and slowdowns
Memorization of transmitters with different codes (up to 250 users).

Jointed or straight, perfect job

It is possible to choose between two different types of arm, based on the particular application needs. In fact, Stylo is available with an articulated transmission arm or with a straight "sled" arm. Came suggests the use of the latter option, in the event that the lateral dimensions must be reduced, allowing the installation of Stylo in the presence of a wall or fence close to the pillar.

STYLO-ME GEARMOTOR TECHNICAL DATA SHEET:

Degree of protection: IP54
Power supply: (V - 50/60 Hz) 230 AC
Motor power supply: (V - 50/60 Hz) 24 DC
Absorption: 5A max
Power: 48W
Opening time at 90 °: ADJUSTABLE
Intermittence / Work: INTENSIVE SERVICE
Torque: 100Nm
Operating temp .: (° C) -20 ÷ +55

ZLX24MA - Multifunction control panel for 24V motors with 230V AC power supply For 24 V two-leaf swing gates with encoder or with deceleration switch and electric lock Programming and signaling display, self-diagnosis of safety devices.

Adaptive Speed ​​& Torque Technology. 2 security inputs and storage for up to 250 users.

Control panel technical details:

Power supply (V - 50/60 Hz) 230 AC

Motor power supply (V) 24 DC

Board power supply (V) 24 AC2

Stand-by consumption (W) 33

Power (W) 260

Transformer thermal protection (° C) 120 RAL 7040 color

Operating temperature (° C) -20 ÷ +55

Cycles / hour 20 Consecutive cycles 20

Degree of protection (IP) 54

Insulation class I.

Memory Roll card connector

Connector for CAME KEY7

Display 8 Keys for programming

RSE10 card connector

Connector for RIO card CONN

Plug-in radio frequency card connector (AF)

Earth star center

Terminal block for BUS devices

Terminal block for the connection of the limit switches and / or

encoders

Measurements: 204 x 273 x 132 mm

THE KIT IS COMPOSED OF:

Nr. 1 - CAME STYLO-ME 24V irreversible gearmotor with encoder for swing gates max 1.8 m per leaf

Nr. 1 - CAME ZLX24MA Multifunction control panel for 24V two-leaf swing gates with encoder

Nr. 1 - CAME DIR10 Pair of photocells with range up to 10mt

Nr. 1 - CAME AF43S Superheterodyne 433.92 MHz plug-in radio card

Nr. 1 - CAME STYLO-BS Articulated transmission arm

Nr. 1 - CAME K-LED24 24V LED signaling flashing light

Nr. 1 - CAME TOP-A433N 433.90 MHz tuned antenna

Nr. 1 - CAME TOPD4RBS-806TS-0121 four-channel ROLLING CODE dual frequency BLUE