Movement beacon in ABS for outdoor use with IP54 protection degree.
Careful design made with high quality materials, with LED lighting technology that makes it particularly efficient and long lasting.
Optional accessories
The electronic card of the flasher is designed for connection of an AF card for remote control and for connection of a device (CAME KEY / Wi-Fi Gateway - BLE / Slave Module) for controlling Came Automations via CAME connection Connect.
BUS technology CXN.KRX1B1RW- RGB LED flashing light with white dome
DATA SHEET
CNX BUS power supply
Power (W) 4
Operating temperature (°C) -20 ÷ +55
Degree of protection (IP) 54
Frequency (MHz) * 433 / 868 433
From the control panel, it is possible to configure the following parameters:
- flashing or cycle flashing operating mode;
- flashing color during opening;
- flashing color when closing;
- flash color in pre-flashing;
- color waiting for automatic closing (if activated);
- error signal color;
- maintenance signal colour;
To take full advantage of the Speedlight's features, make sure you have the latest one
Firmware version of the control panel.
App Setup
The flashing light can also be configured using the App Setup (locally or via CAME
Connect) using a device (CAME KEY / Wi-Fi Gateway - BLE / Slave Module).
From App Setup in addition to configuring the parameters listed above, you can also set
the flashing mode (normal / fast / double flash / steady on) during opening
and closure