CAME 3199ZL160 - Electronic card for FLEX motors

The ZL160 control panel is suitable for controlling a 24V automation with power up to 48W, for FLEX series gearmotors, frequency 50 ÷ 60 Hz Designed and built entirely by CAME SpA, it complies with the UNI 8612 standards in force. The switchboard must be powered at 230V (ac) on terminals L1 and L2, and is protected at the input with a 5A fuse, while the low voltage control devices And they are protected with a 1.6A fuse. The total power of the accessories (24V) must not exceed 40W.

Power supply 230V (a.c.)

For FLEX Motor Connection 1 Motor

Output (24V a.c. - 25W max.) in motion (e.g. flasher)

Warning light (24V a.c. - 3W max.) "gate open"

24V output (a.c.) accessories power supply (max 40W

Electric lock connection (12V-15W max.)

Stop button

Open button

Button (N.O.) for partial opening (opening of the 2nd motor)

Close button

Contact (N.C.) of reopening during the closing phase

Radio connection and / or button (N.O.) for commands

Contact output (N.O.) Contact range: 5A - 24V d.c.

Antenna connection