CAME 8K01MB-015 Complete irreversible swing kit up to 1.8m STYLO 24V articulated arm

Main features
Irreversible motors with key release

Encoder movement control.
Tested according to the parameters dictated by current legislation.
For installations on gates with pillars of minimum width (starting from 8 cm) also close to a wall or a fence, thanks to the option with straight arm.
& Nbsp;

Possibility of emergency operation in case of blackout.
Reliable and robust even if small in size, thanks to irreversibility the system.
Release system with personalized key.
& Nbsp;

Self-diagnosis of safety devices before each movement
Display to view the programming of the functions
Signaling LEDs integrated in the electronic board, for quick diagnosis of any system failure

Only 80 mm (3.2 in) of pillar; is enough for STYLO, the ideal automation for swing gates up to 1.8 m (6 ft) in length per leaf, installed on small pillars or in the presence of fences or walls close to of the gate.

With STYLO you have the possibility to automate the gate quickly, without invasive or expensive operations, even where there are no predispositions. I'm sufficient 80 mm (3.2 in) of pillar width to ensure correct installation. The aesthetics of the gate remain unchanged and its movements they acquire modernity and efficiency.

Encoder electronics for safe management of leaf movement and slowdown phases: the system accurately detects the presence of any obstacles along the way.

LIMITS OF USE
Leaf length Max. door
Up to 1.8 meters 100 Kg
Up to 1.2 meters 125 Kg
Up to 0.8 meters 150 Kg

x 2  STYLO-ME 24V irreversible gearmotor for swing gates

x 2  STYLO-BS Articulated transmission arm
x 1  ZLX24SA Multifunction control panel for gates with two swing doors.
x 1  AF43S Plug-in radio frequency card 433.92 Mhz.
x 1  TOPD4RBS four channel 433.92 Mhz multi-user transmitter Rolling Code
x 1  DIR10 Pair of external photocells at 12 - 24 V AC - DC. Capacity: 20 m.
x 1  KLED24 LED signal flasher.